Florians Teslacoilpage

The 2" base is made out of 8mm Plexi, the groundplate is out of 19mm wood, spacing between the two layers is done with 25mm PVC-pipes and M8 rods.

Here you see the connection for the HV-ground of the Secondary and the strikerail-connection.

The 2" primary is made out of 10m of 6mm² copperwire. It´s wound for 11 turns on an 25 degrees plexi-angle.

This is the Primary-tapping, all connections are done with 6mm² OFC-copperwire.

	2 Inch Teslacoil
	Primary
Home 0,5 Inch Teslacoil 1 Inch Teslacoil 2 Inch Teslacoil Primary Secondary Tank Capacitor Sparkgap Topload Sparks Old Coil Sparks New Coil Powersupply Old 2" Coil HV Filter 3 Inch Teslacoil 4 Inch Teslacoil 5 Inch Teslacoil 6 Inch Teslacoil 8 Inch Teslacoil 10 Inch Teslacoil Powercontrollers About me... News Links Guestbook	The 2" base is made out of 8mm Plexi, the groundplate is out of 19mm wood, spacing between the two layers is done with 25mm PVC-pipes and M8 rods. Here you see the connection for the HV-ground of the Secondary and the strikerail-connection. The 2" primary is made out of 10m of 6mm² copperwire. It´s wound for 11 turns on an 25 degrees plexi-angle. This is the Primary-tapping, all connections are done with 6mm² OFC-copperwire.